Professional window cleaning for residential, strata and commercial buildings across Sydney — protecting your glass while maintaining the presentation your building deserves.
Calcium and silica minerals carried by water from concrete, render and roof surfaces deposit on glass continuously — bonding chemically to the surface with every wet and dry cycle.
White or grey haze across glass that does not respond to standard cleaning — calcium and silica from hard water have bonded to the surface.
Dull, slightly greenish film reducing glass clarity — airborne biological growth has settled and is beginning to degrade the glass surface.
Permanent clouding or pitting that does not clean off — mineral deposits have chemically etched into the glass. Only resurfacing or replacement fixes this.
Mould, staining and organic growth along window frames and sill junctions — seal integrity is being compromised and water infiltration risk is increasing.
Noticeably dimmer interiors despite adequate external light — contaminated glass is blocking natural light transmission into occupied spaces.
UPKEEP provides rope access painting, facade maintenance, concrete repairs, remedial works, sealant replacement, soft washing, window cleaning, roof cleaning, anchor testing and building inspections throughout Sydney.
Whether a project requires rope access, EWP access, ladders or ground-based access, we use the safest and most efficient method to complete painting, remedial and maintenance works.
Coastal and high-pollution buildings benefit from quarterly cleaning. Standard commercial buildings typically clean every six months. Residential strata buildings are usually cleaned annually. The right frequency depends on your building's location, orientation and occupancy.
Yes. We use rope access to clean windows on buildings of any height — safely, without scaffolding and with minimal disruption to building operations and residents.
Mineral deposits from hard water runoff — primarily calcium and silica — bond to the glass surface over time. If left untreated they chemically etch into the glass itself. Once etched, the damage cannot be removed by cleaning alone and requires specialist glass restoration or replacement.
Yes where access and building management requirements allow. Interior cleaning is typically included in post-construction cleans and can be added to regular maintenance programmes on request.
All high-rise window cleaning is carried out using rope access by IRATA certified technicians. Every job begins with a site risk assessment, anchor point verification and rescue plan. We do not use unverified anchor systems or improvised rigging.
A pure water system filters and deionises water to zero total dissolved solids. When applied to glass and allowed to rinse off, it leaves no mineral residue — producing a spot-free result without detergents or chemicals. It is the most effective method for routine window cleaning.
No — when done correctly. We use appropriate pressure and technique for each surface. We inspect seals and frames during every clean and report any pre-existing damage or deterioration that needs attention.
Yes. Every window clean includes frames, sills and reveals as standard. These areas accumulate contamination that compromises seal integrity if left untreated. We also inspect and report on seal and frame condition during every visit.
Light to moderate mineral deposits can be removed with specialist treatment during the cleaning process. Heavy or long-standing deposits that have begun to etch into the glass may require specialist glass restoration. We will advise during the assessment if this is likely to be the case.
Our team holds a broad range of certifications and licences across the business including IRATA and SPRAT rope access qualifications, public liability and workers compensation insurance, First Aid, Police Checks, Working with Children, Height Safety System Installation and Testing, EWP over 11m, Asbestos Awareness, Confined Spaces, and Painting and Decorating trade qualifications. Every job is staffed with the right people for the scope of work.